Runabout Shift Knob
Superklasse is the home of the ORIGINAL OEM style weighted leather shift knobs. Often imitated, but can never be duplicate.
Tired of your boring OEM leather knob which practically weighs nothing?
Look no further! Our weighted OEM style leather shift knob is designed to meet the optimal weight required to assist in your ultimate shifting experience. You will experience smoother and faster shifts! OEM facory look with that weighted aftermarket feel.
Details of Shift Knob:
- OEM spec design
- Better stitching than OEM. We made it more even and symmetric
- Weight: 350 grams (double the weight of factory knob)
- Wrapped in Italian Leather
- Meticulously hand stitched
- OEM look and quality
- Factory OEM direct fit
- Fully customizable
- Designed for Toyota cars but fits other makes and models
Confirmed and Tested Fitments:
- MR2 (AW11)
- MR2 (SW20)
- MR2 / MR-Spyder (ZZW30)
- Celica (All Gens)
- Supra (with or without reverse lockout) (T56 Tranny Swap)
- Trueno (AE86)
- Matrix / xrs
- Scion TC/TC2 XB XA
- FR-S /86 /GT-86
- And more
- WRX / Impreza
- Miata Mx-5 (All Gens)
- Mazda 3
- Civic Si
- Civic Type-R
- Del Sol
- Camaro (special adapter needed)
We continuously looking for testers for other makes and models, if you don't see a car model listed above and would like to give our knobs a try, contact us. We offer a sponsorship program just for you.
**If you have another make and model and not sure about fitment, contact us. We can definitely make a thread adapter to fit your car**
- Available in Red, Black, Grey, Blue, Yellow
and Tan stitching (currently still on older version with 315 grams)
-5 Speed pattern available in RED BLACK BLUE YELLOW GREY TAN
- 6 Speed patterns available in only RED & BLACK (custom color stitching available for a small additional charge)
- (6 speed patterns will be laser etched)
** We can also do any custom gear pattern**
** Custom Midship Runabout logo available upon special request.** (+$30)
- Blank (No Pattern) also available
- M12 x 1.25 thread pitch
- Available in M10 x 1.25
- Available in M10 x 1.5
- We offer various thread adapters to fit other makes and models as well. (Contact us for more details)
Not loving our Red, Black, Blue, Grey, Yellow or Tan stitching? We got you covered!
We can customize your stitching to any desired color you wish.
We charge $30 flat rate fee for all custom work. Just choose "custom color stitching" on the options above and let us know what color you wish, and/or any custom engravings
Meticulously hand stitched in the US
Quick 7 days turn around for most orders.
Contact us for any custom request or questions.
ELEVATE YOUR SHIFTING EXPERIENCE!
Superklasse / www.super-klasse.com is the home of the ORIGINAL and AUTHENTIC OEM style weighted leather shift knobs. We created, designed, and engineered this shift knob from scratch.
It has come to our attention that a few FAKES / REPLICA copies of our knobs has emerged on the market and claiming it to be the same as ours.
We have a few AUTHORIZED re-sellers that carry and sell our shift knobs.
If if does not say "Made and Designed by Superklasse" on their respective listings, then it is not authentic and the shift knobs are not coming from us.
QUESTIONS & ANSWERSAsk a Question
I have a 2013 Scion FR-S AT. The AT shift knob has a M10x1.25 thread pitch. You also need a knob that is specifically made for the AT to keep the shift boot in place. The stock AT knob has a lip on the bottom to retain the boot. How much for this knob, blank with red stitching?
Hi! We can make the knob to fit M10x1.25 thread pitch levers. Blank/No Pattern costs $59.99
Hi, what is the width and height of this knob?
approximately Height 60mm x width 50mm
Will this fit my 2001 Honda Prelude? I’m not sure the thread size
Yes it will fit. We have the correct thread size for the prelude. Honda thread pitch is M10x1.5
Will this shift knob fit my Toyota MR-S with 2zz 6 speed swap?
Yes! We have 6 speed pattern with Reverse (R) being on the top left. This should work with your 2zz swap perfectly.